Specifications:
Wood Type - Hard Maple

Finish - Black Lacquer with dull rubbed effect

Dimensions

• Base 30 3/4" (76cm) wide x 30" (76cm) deep
  
• Overall height in closed position 87" (221cm)
  
• Overall height all frames fully extended 164" (416cm)
  
• Maximum height capacity for paintings 109" (277cm) (setting on sliding frame)
  
• By setting painting on base and cranking main frame up to full height a 156" (396cm) capacity is attainable.
  
• Minimum height capacity in main clamping frame is 53" (135cm) Any painting below this height can be secured by using an auxiliary stay, which is inserted into the center guide rail tracks in the clamping frame. Two sizes are standard with easel 1 1/4" (4cm) & 3" (8cm) Custom sizes are available upon request.
  
• The bottom painting tray and the top clamping frame tray standard depth is 3" (8cm). Custom sizes are available upon request.

Construction Features

• The main frame and base of the easel is mortise and tenon construction, a time honored joinery technique to guarantee generations of use.
  
• All other frames are splines or doweled.
  
• The tongue and groove tracks on the sliding frames are precisely fitted and then waxed to ensure smooth operation.

Mechanical

• Main frame cranks up and down utilizing a 3-1 gear ratio. The 3/4" acme threaded rod allows smooth cranking.
  
• Tilting frame cranks out 5º beyond vertical.
  
• The crank handle for A & B is easily removed. A ratchet type ball-socket connection holds handle firmly in place while in use but allows quick disconnect.
  
• Sliding frame goes up and down inside secondary frame via rope and pulley system.
  
• Locking ball casters provide flexibility and stability.
  
• A bronze leveling screw attached to one caster compensates for irregularities in the floor.

Specifications: PSE-M-200
This model is the same as the PSE-200 except it is motor driven instead of hand cranked. The motors are gear driven so they offer power as well as smooth operation. The controls for the tilt motor are located on the side of the easel. The control panel for vertical travel is supplied with a 12' cord and can be mounted on a tripod. Both controls feature an off /on switch and a variable speed control. The variable speed allows exact positioning of the work (* - 1/32").
* A wall mounted track installation is possible for both models.
* Model 200 is often customized to suit the needs of the individual studio.

For additional information or pricing please contact us at 610-767-0291.